VPA1407120-Front-Stand-800x530VPA1407120-Front-Stand-800x530
VPA1407120-Left-Stand-800x530VPA1407120-Left-Stand-800x530
VPA1407120-Right-Stand-800x530VPA1407120-Right-Stand-800x530
VPA1407120-Right-Laydown-800x530VPA1407120-Right-Laydown-800x530
VPA1407120-Left-Laydown-800x530VPA1407120-Left-Laydown-800x530
VPA1407120-Right-Side-Laydown-800x530VPA1407120-Right-Side-Laydown-800x530

VPA1407120

VCO
GaN
XH2.54
SMA-F
This module uses an XH2.54 interface to monitor internal operating status and supports 50W/100W power output in the 400MHz~6GHz frequency band. This product is widely used in fixed signal jammers.

Produce Range

*Note: The “Selectable Frequency Range” shown in this table refers to the manufacturing coverage, not the exact output range of a single module. Each module must operate within this range, with an actual output bandwidth that does not exceed the “Maximum Selectable Bandwidth.”

Selectable Frequency Range Maximum selectable bandwidth Maximum selectable output power
400-700MHz 300MHz 50W
700-1000MHz 300MHz 100W
1100-1200MHz 100MHz 80W
1200-1500MHz 300MHz 50W
1500-1600MHz 100MHz 100W
1600-4000MHz 300MHz 50W
4000-5800MHz 300MHz 45W
5800-6000MHz 200MHz 40W

Specification

Item Indicator
Operating Voltage 28V
Operating Current 50W: ≤5A/100W: ≤7.5A
Enable Switch Voltage 5V(Customizable)
In-band Fluctuation ±1.5dB
XH2.54 Interface Definition-TEMP_DET Temperature detection AD voltage value
XH2.54 Interface Definition-PA_FWD Forward power detection AD voltage value
XH2.54 Interface Definition-PA_REV Standing wave alarm, high-level alarm, low-level elimination
XH2.54 Interface Definition-PA_EN Enable switch; open with high-level 3V~5V, close with low-level<2V.(For installation, please confirm with sales.)
XH2.54 Interface Definition-PA_ADJ NC
Module Protection Over-temperature protection; VSWR protection
LED Module Indicators POWER: Power indicator; RUN: Operation indicator; VSWR: VSWR alarm indicator
Weight 390g

*Special Disclaimer: Due to the transition period between product updates and online display, the image and text specifications on this page may differ from the actual product. The images and text on this page are not intended to be used as a basis for actual delivery. Specific product and technical specifications are subject to the actual product configuration. Interested buyers should contact Zorelock sales staff for confirmation. Zorelock reserves the right to modify image specifications and make final interpretations.

Contact To Sales to get the .stp file.

3D Model Viewer

Slide

Looking for some information or advice?

Looking for some information or advice?

Looking for some information or advice?

Talk to Sales!